To Mark Damages inside an order, press the Inspection button, and then press the blue Mark Damages button. Tap the screen on the wire diagram wherever you find a damage on the actual vehicle, just as you would during a standard vehicle inspection.
A radio button menu will appear for you to indicate which damage type you are marking, including: S for Scratched, CR for Cracked, D for Dent, PC for Paint Chip, R for Rubbed, FF for Foreign Fluid, MD for Major Damage, and SC for Scuffed. Press Done after each damage marking selected. When you have finished marking all damages, press the Blue Done button at the top.
Damage Types Full List - as of September 2019
BR, Broken
CH, Chipped
CR, Cracked
D, Dent
F, Faded
FF, Foreign Fluid
FT, Flat Tire
G, Gouge
HD, Hail Damage
LC, Loose Contents
M, Missing
MD, Major Damage
MS, Multiple Scratches
O, Other
R, Rubbed
RU, Rust
S, Scratched
SC, Scuffed
BOLs sent with the updated app release contains these damage types.
[ If you need to start all over, Press Clear All. ]
If you need Help or further assistance, please contact Support chat on the bottom right of the screen.